Our Certifications
Quality and compliance credentials supporting VitaMFG manufacturing.
Why Choose VitaMFG for Creatine Electrolyte Gummies?
- Full 5 g creatine target rather than an under-dosed gummy concept
- Elemental sodium, potassium and magnesium shown separately
- Planned mineral sources documented instead of hidden inside a generic electrolyte blend
- High-powder, high-salt gummy development with flavor and texture screening
- Creatine, creatinine and mineral verification planned around the approved formula
- OEM/ODM support from feasibility review through pilot, packaging and scale-up
A Full-Serving Creatine Gummy with Transparent Electrolytes
CR09 is a U.S.-first R&D concept for adults who want a portable creatine format around training. Each four-gummy serving targets 5,000 mg micronized creatine monohydrate, 200 mg elemental sodium, 150 mg elemental potassium and 50 mg elemental magnesium. The serving is designed as four 4.5–5.0 g gummies, with Watermelon-Lime and Lemon-Lime identified as initial flavor directions.
This is a feasibility-stage formula, not a production formula. Its main challenge is fitting the creatine and mineral salts into a chewable format without unacceptable saltiness, bitterness, moisture pickup, brittle gel or gritty texture. VitaMFG therefore treats powder loading, ion-source selection, pH, water activity, flavor masking, creatine recovery and packaging as one development system. The gummies do not replace water or an individualized hydration plan. Final sources, flavor, gummy base, label values, claims and warnings follow approved trial and stability data.
Creatine Electrolyte Gummy Product Directions
Use the CR09 baseline as the starting point, then close the flavor, ion-source balance, sweetness system, packaging and label position through project-specific trials.
Creatine Sodium Potassium Magnesium Gummies
The complete CR09 direction with 5 g creatine monohydrate and three separately declared elemental minerals in four gummies.
Watermelon-Lime Creatine Electrolyte Gummies
An initial sensory route using a familiar sports-hydration flavor profile, subject to salt, acid and aftertaste screening.
Lemon-Lime Creatine Electrolyte Gummies
A sharper citrus alternative for brands that want stronger acid lift against the creatine and mineral load.
Creatine Sodium Potassium Gummies
A simplified formula direction that can be reviewed when magnesium taste or raw-material mass prevents an acceptable four-gummy experience.
Travel-Ready Creatine Gummies
A portable serving concept for consumers who prefer pre-portioned gummies but understand that the product should still be taken with appropriate fluids.
Private Label Creatine Electrolyte Gummies
An OEM/ODM route covering formula review, flavor, serving format, testing, packaging, Supplement Facts and commercialization support.
Product Advantages for Creatine Electrolyte Gummies
CR09 turns a high-load sports nutrition concept into four visible facts that shoppers and purchasing teams can understand quickly.
5 g Creatine Monohydrate
The complete serving targets 5,000 mg of the reference creatine form rather than relying on a vague proprietary complex.
Transparent Mineral Amounts
Sodium, potassium and magnesium are stated as elemental values so the formula story can be checked against specifications and testing.
Four-Gummy Format
Four 4.5–5.0 g gummies provide a pre-portioned alternative to scoops and shakers while keeping the serving requirement visible.
Training and Travel Fit
The format is designed for gym bags, commuting and travel, while responsible directions continue to emphasize suitable fluid intake.
Carry the Dose without Losing the Chew
Five grams of creatine plus three mineral systems create more physical load than the elemental numbers suggest. Sodium and potassium source ratios affect saltiness, acidity and raw-material mass, while magnesium can add bitterness and change the gel. VitaMFG reviews actual supplier assays, staged mineral premixing, powder dispersion, pH, water activity, depositing and drying. A flavor moves forward only if the full four-gummy serving remains acceptable.
Verify Creatine and Minerals before Scale
Creatine gummies face a trust problem when label dose and finished-product content do not match. CR09 therefore requires formula-specific sampling and analytical planning. The development path reviews creatine recovery, creatinine formation, sodium, potassium and magnesium values, content uniformity, moisture, water activity, texture, sticking and microbial quality. Accelerated and long-term stability run alongside packaging work. High-barrier packaging, light protection and desiccant use are selected from data rather than added as decorative claims. Only a formula that passes the agreed pilot and stability gates should move to commercial specifications.
Resource Center
Catalog Download
Explore VitaMFG creatine, electrolyte and high-load functional gummy platforms.
DownloadCertifications Download
Request current factory, quality-system and certification records for supplier review.
DownloadVideos
See the laboratory, mixing, depositing, drying, packaging and quality-control environment.
Watch VideoEngineering-Led Support for High-Load Sports Gummies
VitaMFG is an engineering-led functional gummy manufacturer with an NSF/ANSI 455-2 GMP-certified quality system. Our current creatine manufacturing platform connects formulation feasibility, controlled processing, analytical review and commercial scale-up. Under standard conditions, plant capacity can reach 8–10 metric tons per day, subject to formula, gummy weight, packaging and production scheduling.
For CR09, each team works from the same target: 5 g creatine monohydrate and three transparent elemental mineral amounts in four gummies. Trial records capture specifications, yield, pH, water activity, temperature, hold time and sampling positions. Testing, stability, packaging review, batch records and retained samples then support commercial transfer. No laboratory target becomes a production promise before those gates pass.
Creatine Electrolyte Gummy Projects for Different Markets
The CR09 platform can support different commercial routes while preserving the exact dose, serving count and hydration boundary.
Sports Nutrition Brands
Build a creatine-led product for adult training routines with the full 5 g amount at the center of the page. The electrolyte story should remain factual: declare sodium, potassium and magnesium separately, explain the intended use occasion and avoid presenting one fixed mineral profile as the right hydration plan for every athlete or environment.
Gym and Fitness Retailers
Offer a pre-portioned alternative for shoppers who dislike measuring powder. Shelf and product-page communication should show “4 gummies per serving” as clearly as “5 g creatine,” because serving burden, gummy size and texture influence repeat use. Flavor testing must cover the complete serving rather than a single gummy.
Amazon and DTC Brands
Use verification, formula transparency and sensory honesty as the trust story. VitaMFG can align raw-material specifications, Supplement Facts, testing scope, customer-service answers and batch documentation so the brand can respond directly to questions about creatine amount, mineral sources, grit, sodium and appropriate fluid intake.
Travel and Active-Lifestyle Lines
Position the gummies for commuting, travel and days when mixing powder is inconvenient. The page may explain portability, but it should not imply that gummies eliminate the need for water. Package selection must also address heat, humidity, sticking and transport exposure before the travel story is finalized.
What Consumers Expect from Creatine Gummies
Public category reviews show the trade-off: shoppers like portability but reject gritty texture, unpleasant flavor and excessive serving counts. These are third-party reviews of other products, not CR09 or VitaMFG reviews and not health evidence.
Creatine Electrolyte Gummies Specifications
| Parameter | Development Baseline | Customization / Notes |
|---|---|---|
| Product Type | Creatine + Electrolyte Gummies | Private Label / OEM / ODM |
| Formula Version | CR09, Wave 3 feasibility gate | U.S.-first R&D design target; not a production formula |
| Intended Position | Portable creatine and electrolyte format for 18+ active adults | Final target user, age boundary and warnings require label review |
| Serving Size | 4 gummies per day | One complete serving |
| Target Gummy Weight | 4.5–5.0 g per gummy | Approx. 18–20 g total serving weight |
| Creatine | Target: 5,000 mg micronized creatine monohydrate per serving | Supplier specification target: ≥99.9%; final label value follows approved formula and testing |
| Sodium | Target: 200 mg elemental per serving | Planned sodium citrate / sodium chloride balance; final ratio follows formula, assay, chloride and sensory review |
| Potassium | Target: 150 mg elemental per serving | Planned potassium citrate / chloride route; exact source balance confirmed during development |
| Magnesium | Target: 50 mg elemental per serving | Planned source: magnesium citrate; raw-material mass follows supplier assay |
| Flavor | Watermelon-Lime or Lemon-Lime first-trial directions | Final flavor not locked; center flavor plus one stronger masking option recommended |
| Gummy Base | Recommended high-salt, high-powder pectin development system | Pectin, vegan, gelatin-free, low-sugar or sugar-free claims require final formula confirmation |
| Process Route | Weighing / premix / gummy-mass preparation / controlled late addition / depositing / drying / finishing / packaging | Final sequence and limits follow equipment and trial data |
| Packaging | High-barrier sealed packaging recommended | Desiccant, light barrier and bottle or pouch format follow stability and transport work |
| Finished-Product Testing | Identity / assay / uniformity / microbiology / heavy metals / applicable contaminants / weight variation / sensory / package integrity | ICP or ion chromatography considered for Na, K, Mg and chloride; final methods and limits approved per project |
| Stability Focus | Creatine and creatinine / mineral values / moisture / water activity / texture / syneresis / sticking / flavor | Accelerated and long-term studies run with the proposed commercial package |
| Claims Boundary | Evidence-supported structure/function wording only | Product does not diagnose, treat, cure or prevent disease; claim substantiation and U.S. notification completed where applicable |
| Use Boundary | Does not replace water or an individualized hydration plan | Kidney disease, sodium/potassium restriction and relevant medication use require professional guidance |
| Project Status | Conditional development priority S | P0 specifications → P1 feasibility → P2 analysis and stability → P3 pilot and commercial review |
| MOQ & Timeline | Confirmed after feasibility review | Depends on approved formula, gummy weight, testing, packaging and forecast volume |
Frequently Asked Questions
Start Your Supplement Manufacturing Project
Tell us what you want to manufacture — including dosage form, formulation requirements, packaging, target market, and expected volume. We'll review your project and recommend the next steps.
Share your project details — our team will review feasibility, process alignment, and next steps.
